STANDBY MODES
020.
ON THE BACK OF YOUR ACTON, YOU WILL FIND A SWITCH THAT ALLOWS
YOU TO CHOOSE BETWEEN TWO DIFFERENT STANDBY MODES: POWER-
SAVER OR STANDARD.
EUROPEAN UNION REGULATION STATES THAT ELECTRONIC DEVICES
MAY ONLY HAVE 0.5W POWER CONSUMPTION IN STANDBY MODE (THE
EUROPEAN DIRECTIVE ON ENERGY RELATED PRODUCTS, OR ERP). THIS
IS WHY THE ACTON’S FACTORY DEFAULT SETTING IS THE POWERSAVER
MODE, BECAUSE THE POWERSAVER MODE SAVES MORE ENERGY THAN
THE STANDARD MODE.
AS THE NAME IMPLIES, USING THIS SETTING SAVES POWER. WHEN YOU
STOP PLAYING MUSIC, THE ACTON WILL GO INTO A LOW-POWER STATE
AFTER 20 MINUTES. POWERSAVER MODE CAN BE DISABLED IF YOU WANT
ACTON TO START AUTOMATICALLY AND STAY VISIBLE ON YOUR LIST OF
BLUETOOTH DEVICES AFTER 20 MINUTES. TO DISABLE POWERSAVER,
SIMPLY CHANGE THE SWITCH TO STANDARD MODE.
001. 002.
To Next Page
Loading...
