Marshall Amplification CV620-IP User Manual

CV620-IP / CV620-IPW
23 User Manual v.1
Saturation
0~ C~25
Adjustable in the Custom Mode
Black Level
1. Disable
2. Type 1
3. Type 2
4. Type 3
5. Type 4
6. Type 5
Adjustable in the Custom Mode
Gamma
0~ C~3
Adjustable in the Custom Mode
Skin Tone
0~ C~5
Skin tone setting, adjustable in the
Custom Mode
Pan Tilt Zoom
Pan/Tilt Limit
ON/Off
Turn on/off the angle limit setting
Pan Right Limit
0~170
Limit the right angle
Pan Left Limit
-170~0
Limit the left angle
Tilt UP Limit 0~90
Limit the upward angle
Tilt Down Limit
-30~0
Limit the downward angle
Pan/Tilt Speed Preset/Low
Adjust Pan/Tilt Speed
Pan Flip
On/Off
Activate the reverse Pan command
Tilt Flip
On/Off
Activate the reverse Tilt command
Preset Speed
1. 5 per second
2. 25 per second
3. 50 per second
4. 100 per second
Set the rotation speed of the cradle
head when Preset is executed
PTZ Speed
Comp
On/Off
PTZ Speed Compensation
Dig-Effect
Mirror
1. Disable
2. Mirror
3. Flip
4. Mirror + Flip
Set the mode at which the image is
turned
Auto Focus
AF Sensitivity
1. Low
2. Middle
3. High
Select the AF triggering speed. The
higher the speed is, the faster AF is
triggered
AF speed
Fast / Normal
Focus speed after AF triggering
AF Frame
Full Area/Center
Area
AF frame setting, when central area
was set as AF frame, focusing will be
on the center of the screen. When Full
Frame was set as AF frame, focusing
will be calculated based on the full
screen
Ethernet
DHCP
On/Off
Enable/Disable DHCP setting using left
and right arrow keys and press
[ENTER] to apply setting.
IP Address
192.168.100.150
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Subnet mask
255.255.255.0
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.

Marshall Amplification CV620-IP Specifications

General

Brand	Marshall Amplification
Model	CV620-IP
Category	Security Camera
Language	English