Marshall Amplification CV620-IP - Page 24

CV620-IP / CV620-IPW
24 User Manual v.1
Gateway
192.168.100.254
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
System
Prompt
On / Off
Turn on/off the prompt information on
the display
IR Receive
On / Off
Turn on/off the infrared reception
Motionless
Preset
On / Off
When the function is enabled, the
screen will Freeze when Preset is
executed. Freeze will be released after
Preset is completed.
Audio In
Line In/Mic In
Set Audio In
Audio Enable
On / Off
Turn on/off sound output
Audio Volume
0~10
Volume Setting
Encode
Sample Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(G.711
4. 8 KHz(G.711)
Set the encode type and sample rate
SDI supports the audio output of 48
KHz only.
Language
English / Chinese
Language
Output Mode
1. 1080p/60
2. 1080p/59.94
3. 1080p/50
4. 1080p/30
5. 1080p/29.97
6. 1080p/25
7. 1080i/60
8. 1080i/59.94
9. 1080i/50
10. 720p/60
11. 720p/59.94
12. 720p/50
Set output resolution
Protocol
Protocol V /
Protocol PD
Protocol V: VISCA
Protocol PD: PELCO D
PD Address 1~ C~255
The Protocol set to PD allows the
camera ID address to be assigned
Factory Reset On / Off
Resume the factory default setting
FW Upgrade
On / Off
Upgrade Firmware
Status
Display the current setting status