EasyManuals Logo

Marshall Amplification CV730 User Manual

Marshall Amplification CV730
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
28
PTZ Assist On / Off
This function can only be
enabled in the Manual
Focus (MF) mode
When PTZ Assist is
enabled and PTZ control
is in operation, the focus
performs only once upon
immediate execution.
The focus will not be
triggered afterward when
the scene changes
Ethernet
DHCP On / Off
Enable/Disable DHCP
setting using left and
right arrow keys and
press [ENTER] to apply
setting.
IP Address 192.168.100.100
Press [ENTER] to be in
modify mode; select the
item to be modified using
the up and down keys,
and modify the value
using the left and right
keys or the numeric
keys.
Subnet Mask 255.255.255.0
Press [ENTER] to be in
modify mode; select the
item to be modified using
the up and down keys,
and modify the value
using the left and right
keys or the numeric
keys.
Gateway 192.168.100.254
Press [ENTER] to be in
modify mode; select the
item to be modified using
the up and down keys,
and modify the value
using the left and right
keys or the numeric
keys.
29
Audio
Audio In Line In/Mic In
Set Audio In
Audio Enable On / Off Turn on/off audio output
Audio Volume 0 ~ A ~ 10 Volume Setting
Encode
Sample Rate
1. 48 KHz (AAC)
2. 44.1 KHz (AAC)
3. 16 KHz (G.711)
4. 8 KHz (G.711)
Set the encode type and
sample rate
SDI supports the audio
output of 48 KHz only
System
Prompt On / Off
Turn on/off the prompt
information on the
display
IR Receive On / Off
When it is Off, the
remote control will not be
able to control the
camera. At this moment,
turn off and then turn on
the power to restore
control of the remote
control.
Tally Lamp On / Off
Select to enable or
disable Tally Lamp
function.
Language
English
/ Chinese
Initial Position
Last operation/First
default position
Select the camera lens
to return to the last
operated position or the
first preset position after
POWER ON.
Control Device Encoder / Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking
system
Motionless
Preset
On / Off
When the function is
enabled, the screen will
Freeze when Preset is
executed. Freeze will be
released after Preset is
completed.
CV730 Manual
www.marshall-usa.com27 28

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marshall Amplification CV730 and is the answer not in the manual?

Marshall Amplification CV730 Specifications

General IconGeneral
BrandMarshall Amplification
ModelCV730
CategoryCamcorder
LanguageEnglish

Related product manuals