ENGLISH
3
From clean to distorted overdrives, the DSL is
a versale all-valve amp packed with features
including an eects loop, power reducon
switch and digital reverb. Your amp has been
specically designed to sound great at a range
of volumes. Perfect for you to use at home, in
rehearsals and studios, or on stage.
MODEL: DSL1CR DSL1HR
Power
1W
(with power
reducon
opon to 0.1W)
1W (with
power
reducon
to 0.1W)
Valves
2 x ECC83 and
1 x ECC82
2 x ECC83
and 1 x
ECC82
Channels
2 (split) “ultra gain” and
“classic gain”
Equalisaon
Volume control, channel
select switch, tone shi
switch, treble, middle, bass,
reverb and power reducon
opon
Eects Digital reverb
Outputs
1 x 1/4” jack speaker output,
16Ω load only, 1 x 3.5mm jack
emulated line out
Eects loops Yes, series, send/return
Speakers
1 x 8”
Celeson G8C-
15”Eight-15”
(15w, 16Ω)
N/A
Unit weight 7.9kg 5.6kg
Unit width 360mm 360mm
Unit height 340mm 210mm
Unit depth 215mm 215mm
SPECIFICATION
and used in accordance with the instrucons,
may cause harmful interference to radio
communicaons.
However, there is no guarantee that interference
will not occur in a parcular installaon. If this
equipment does cause harmful interference
to radio or television recepon, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the
equipment and the receiver.
• Connect the equipment into an outlet on
a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
CAUTION: Any changes or modicaons not
expressly approved by the party responsible
for compliance could void the users authority to
operate the equipment.
This device complies with CAN ICES-3(B)/NMB-
3(B)