006
MIDDLETON – FULL ONLINE MANUAL
BACK TO INDEX
INSTRUCTIONS
GETTING STARTED
I. Push and hold the control knob until the speaker turns on.
II. Push the Bluetooth
®
button until the LED turns to a slow red pulse.
III. Select MIDDLETON from your audio device’s Bluetooth list.
CONNECTING AN AUX DEVICE
I. Connect a lead with a 3.5 mm stereo jack to the
AUX input on the back of the speaker.
II. Connect the other end of the lead to the audio output on your audio source.
III. Make sure all connected Bluetooth audio devices are paused.
Note: Audio leads are not included.
CLEANING THE SPEAKER
Clean your speaker regularly to keep it fresh and last longer.
Unplug any leads before cleaning the speaker and make sure everything
is completely dry before plugging in any audio or USB leads.
The silicone sleeve and strap can be removed and cleaned separately.
Use a disinfectant wipe or a lint-free cloth, slightly damp with 70%
isopropyl alcohol or 75% ethyl alcohol to gently clean silicon parts. Dry
them with a towel before putting them back on the speaker.
Carefully clean the speaker mesh and openings with
a dry and soft brush, or a cotton swab.
• Do not use any sharp or metal objects.
• Do not use compressed air.
• Do not use products containing bleach or hydrogen peroxide.
• Do not submerge the speaker in any cleaning agents.
ENGLISH
To Next Page
Loading...
Need help?
General
