Marshall Amplification TUFTON Quick Start Guide

ENGLISH
CD SPEAKER
I. DETACHABLE CARRY STRAP
11. FRONT DRIVERS
@ TOPPANEL
I. BLUETOOTH• BUTTON
PAIRING , SELECTING AUDIO SOURCE AND
WAKING UP FROM STANDBY MODE
11. POWER/VOLUME KNOB
SWITCHING SPEAKER ON / OFF AND
ADJUSTING VOLUME
Ill. BASS KNOB
ADJUSTING BASS LEVE L
IV . TREBLE KNOB
ADJUSTING TREBLE LEVEL
V. BATTERY INDICATOR
SHOWING BATTERY CHARGE
@ BACKPLATE
I. REAR DRIVER
11. MAINS INPUT
THE MAINS INPUT IS LOCATED BEHIND THE
SILICON WEATHER SEAL.
111 . BASS PORT
IV . INPUT FOR 3.5 MM STEREO JACK
PLUG IN AN AUDIO SOURCE AND PLAY .
© POWER ON/OFF
ON: TURN THE VOLUME KNOB CLOCKWISE
TO THE DESIRED VOLUME .
OFF: TURN THE VOLUME KNOB FULLY
COUNTER-CLOCKWISE UNTIL YOU HEAR
A CLICK .
® CHARGING BATTERY
CAUTION: ALWAYS UNPLUG THE MAINS
LEAD FROM THE WALL SOCKET BEFORE
DISCONNECTING IT FROM THE SPEAKER.
I. GENTLY PULL OPEN THE SILICON WEATHER
SEAL ON THE BACK OF THE SPEAKER .
11. CONNECT THE MAINS LEAD INTO THE
MAINS INPUT ON THE SPEAKER .
111. CONNECT THE MAINS PLUG TO THE WALL
SOCKET. THE BATTERY IS FULLY CHARGED
WHEN THE BATTERY INDICATOR STOPS
BLINKING .
© BLUETOOTH ® PAIRING
I. PUSH AND HOLD THE BLUETOOTH BUTTON
FOR 2 SECONDS , UNTIL THE INDICATOR
STARTS TO BLINK .
11. SELECT TUFTON FROM YOUR AUDIO
DEVICE 'S BLUETOOTH LIST. THE INDI C ATOR
TURNS STEADY WHEN PAIRING IS
COMPLETE .
0 CHOOSING AUDIO SOURCE
BLUETOOTH: CONNECT A BLUETOOTH
DEVICE AND START PLAYING .
AUX: PLUG IN AN AUDIO SOURCE VIA A LEAD
WITH A 3.5 MM STEREO JACK AND START
PLAYING .
PUSHING THE BLUETOOTH BUTTON WI LL
TOG G LE BLUETOOTH AND AUX INPUT.
FULL USER MANUAL AVAILABLE AT : WWW . MARSHALLHEADPHONES.COM
001

Marshall Amplification TUFTON Specifications

General

Brand	Marshall Amplification
Model	TUFTON
Category	Speakers
Language	English