Marshall Electronics 13
4.2.2.5 Precautions for installation
1. Before installation, please confirm the orientation of the camera relative
to the object to be captured
2. It is recommended that the camera should be set at a distance of more
than 1 meter away from the object to be captured. Please adjust for a
best distance according to the magnification of the lens
3. The camera (including metal plates) weighs approximately 2.5 kg. If it is
to be installed on the ceiling, please use the hanger that has obtained
UL security approval to prevent the camera from falling down.
4. Please check whether the camera is installed securely on a regular
basis
4.2.2.6 Installation steps
1. Please adjust resolution on DIP switch at first
* Please refer to Chapter 7 DIP Switch Setting
for the relevant
descriptions on DIP switch.
2. Fix the metal plate A on the camera base with 4 M3 screws
1 meter↑
To Next Page
Loading...
