Marshall Electronics CV612HT-4K - DIP Switch Configuration; OUTPUT Switch Settings

Marshall Electronics 29
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [Auto Focus].
3. Press [ENTER] to activate.
4. Press [] or [] to select [AF speed].
5. Press [ENTER] to activate.
6. Press [] or [] to select [Fast / Normal].
7. Press [MENU] to exit.
6.12 Setting the image mode
1. Press [Picture] on the remote control to switch [Off / B&W].
6.13 Freezing images
1. Press [Freeze] on the remote control to freeze the current image on the
display.
6.14 Rotating the image
1. Press [Mirror] on the remote control to switch [Off / Mirror / Flip / Mirror +
Flip].
6.15 Changing the camera direction
1. Press [L/R Direction Set] on the remote control to switch [L/R Direction /
Off / Normal].
6.16 Displaying the current status
1. Press [Info] on the remote control to display the current status information.
6.17 Resetting to the original setting
1. Press [MENU] to activate the setting menu.
2. Press [] or [] to select [System].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Factory Reset].
5. Press [ENTER] to activate.
6. Press [] or [] to select [On].