Marshall Electronics 8
4.2.1.2 Installation steps
1. Please adjust DIP switch at first prior to installation
* Please refer to Chapter 7 DIP Switch Setting for the relevant
descriptions on DIP switch.
2. Place the camera on a flat desk directly to ensure the normal vertical
and horizontal operation of the machine
4.2.2 Installing CV612HT-4K on the ceiling
4.2.2.1 Parts and equipment required for mounting the CV612HT-4K
on the ceiling
1. Accessories of CV612HT-4K in the box
(metal plates A, B and M3 screw x 7)
2. Screw for locking on ceiling mounted hanger x 4
3. Drill and screw driver
To Next Page
Loading...
