4 MAC Encore™ Performance Safety and Installation Manual
Safety Information
The following symbols are used to identify important safety information on the product and in this document:
Warning! The MAC Encore™ Performance™ contains components that are accessible and live at
high voltage while the fixture is connected to power. These components remain under tension for up
to 30 minutes after power is disconnected. Only technicians who are authorized by Martin® and who
have access to the Martin® service documentation for the MAC Encore™ Performance are permitted
to open the fixture.
Warning! Risk Group 2 product according to EN 62471. This product produces intense light output
that may be hazardous if suitable precautions are not taken. Do not view the light output with optical
instruments or any device that may concentrate the beam.
This product presents risks of severe injury or death due to fire and burn hazards, electric shock and falls if
the safety precautions in this manual are not followed.
Read this manual before installing, powering or servicing the fixture. Follow the safety precautions and
observe all warnings in this manual, in the MAC Encore™ Performance User Guide, and printed on the
fixture.
The latest versions of this Safety and Installation Manual and the MAC Encore™ Performance User Guide
are available for download from the MAC Encore™ Performance Support & Downloads page on the
Martin® website at www.martin.com. Before you install, operate or service the MAC Encore™ Performance,
check the Martin® website and make sure that you have the latest user documentation for the fixture.
Document revisions are indicated at the bottom of page 2.
The product is for professional use only. It is not for household use. Respect all locally applicable laws,
codes and regulations when installing, powering, operating or servicing the fixture.
Install, operate and service Martin® products and accessories only as directed in their user documentation,
or you may create a safety hazard or cause damage that is not covered by product warranties.
If you have questions about how to operate the fixture safely, please contact your Martin® supplier or call
the Martin® 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
PROTECTION FROM ELECTRIC SHOCK
• Do not remove any cover from the fixture except as described under “Service and maintenance” on
page 13.
• Disconnect the fixture from AC power before servicing it and when it is not in use.
• Ensure that the fixture is electrically connected to ground (earth).
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault (earth-fault) protection.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
DANGER!
Safety hazard.
Risk of severe
injury or death.
DANGER!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
WARNING!
Fire hazard.
WARNING!
Burn hazard. Hot
surface. Do not
touch.
WARNING!
Intense light
emission.
WARNING! Refer
to user
documentation.
To Next Page
Loading...
Need help?
General
