Martin MAC Encore Performance CLD - Standard RDM Parameter IDs; Manufacturer-specific RDM Parameter IDs

RDM 17
Manufacturer-specific RDM Parameter IDs
Product information
 DEVICE_INFO
 DEVICE_MODEL_DESCRIPTION
 MANUFACTURER_LABEL
DEVICE_LABEL
FACTORY_DEFAULTS
 SOFTWARE_VERSION_LABEL
DMX Setup
DMX_PERSONALITY
 DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS
 SLOT_DESCRIPTION
Sensors
 SENSOR_DEFINITION
SENSOR_VALUE
Usage information
DEVICE_HOURS
DEVICE_POWER_CYCLES
Onboard LCD display
DISPLAY_INVERT
DISPLAY_LEVEL
Configuration
PAN_INVERT
TILT_INVERT
Control
IDENTIFY_DEVICE
 RESET_DEVICE
PERFORM_SELFTEST
SELF_TEST_DESCRIPTION
GET
allowed
SET
allowed RDM parameter ID’s (slot 21-22) Notes
DMX protocol
DMX_RESET
Fixture behavior
EFFECT_SPEED
DISPLAY ERRORS ENABLE
DIMMER_CURVE
FOCUS_TRACKING
DISPLAY_AUTO_OFF
HIBERNATION MODE