Martin MAC Encore Performance CLD - Page 24

24 MAC Encore Performance User Guide
33
0 - 9
10 - 14
15
16
17
18
19 - 22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38-40
41
42
43-51
52
53
54
55
56
57
58
59-60
61
62
63-64
65
66
67
68
69
70
71
72
73
74
75
76-99
100
101
102
103
104
105
106
Fixture control/settings
(hold for number of seconds indicated to activate)
No function (disables calibration) – 5 sec.
Reset entire fixture – 5 sec.
No function
Reset color only – 5 sec.
Reset beam only– 5 sec.
Reset pan and tilt only – 5 sec.
No function
Linear dimming curve – 1 sec.
(menu override, setting unaffected by power off/on)
Square law dimming curve – 1 sec.
(menu override, factory default setting, setting unaffected by power
off/on)
Inverse square law dimming curve – 1 sec.
(menu override, setting unaffected by power off/on)
S-curve dimming curve– 1 sec.
(menu override, setting unaffected by power off/on)
No function
Fast pan and tilt speed – 1 sec.
(default setting, menu override - setting returns to MENU setting after
power on/off)
Smooth pan and tilt speed – 1 sec.
(menu override - setting returns to MENU setting after power on/off)
Parameter shortcuts = ON
Parameter shortcuts = OFF
Focus tracking = OFF
Enable focus tracking at close range – 1sec.
Enable focus tracking at medium range – 1sec.
Enable focus tracking at long range – 1sec.
Video tracking = ON – 1sec.
Video tracking = OFF – 1sec.
No function
Beam smoothing = ON – 1sec.
Beam smoothing = OFF – 1sec.
No function
Turn on control panel display – 1 sec.
Turn off control panel display – 1 sec.
Regulated fan speed, fixed light output intensity – 1sec.
Full fan speed, regulated light output intensity – 1sec.
Medium fan speed, regulated light output intensity – 1sec.
Low fan speed, regulated light output intensity – 1sec.
Ultra-low fan speed, regulated light output intensity – 1sec.
No function
Hibernation mode = ON – 5 sec.
Hibernation mode = OFF – 5 sec.
No function
Pan and tilt limits = ON – 5 sec.
Pan and tilt limits = OFF – 5 sec.
Store current pan position as lower pan limit – 5 sec.
Store current pan position as upper pan limit – 5 sec.
Store current tilt position as lower tilt limit – 5 sec.
Store current tilt position as upper tilt limit – 5 sec.
Reset pan and tilt limits and disable pan/tilt limit functionality – 1sec.
Tungsten Emulation = ON – 1sec.
Tungsten Emulation = OFF – 1sec.
Alternative light source (color temperature shift) = ON – 1sec.
Alternative light source (color temperature shift) = OFF – 1sec.
No function
Enable calibration – 5 sec.
Store pan and tilt calibration – 5 sec.
Store dimmer calibration – 5 sec.
Store cyan calibration – 5 sec.
Store magenta calibration – 5 sec.
Store yellow calibration – 5 sec.
No function
Snap 0
Channel DMX Value Function
Fade
type
Default
value
Table 1: DMX Protocol