Fuel Filter Replacement
Fuel filter (1) is installed in front of fuel tank (2).
Replace fuel filter with new one, referring to Section 6C for removal
and installation.
WARNING:
This work must be performed in a well ventilated area
and away from any open flames (such as gas hot water
heaters).
Fuel Tank Inspection
Check fuel tank for damage, cracks, fuel leakage, corrosion and
tank bolts looseness.
If a problem is found, repair or replace.
Fuel Tank Cap Inspection
Check fuel filler cap (1) for malfunction and damage, gasket (2) for
even filler neck imprint, deterioration and damage. Replace if
faulty.
EMISSION CONTROL SYSTEM
PCV (Positive Crankcase Ventilation) Valve Inspec-
tion
Check crankcase ventilation hoses and PCV hoses for leaks,
cracks or clog, and PCV valve (1) for stick or clog. Refer to Section
6E1 for PCV valve checking procedure.
Fuel Evaporative Emission Control System (if
equipped)
Check EVAP (Evaporative Emission) canister for damage, clog
and operation referring to Section 6E1.
MAINTENANCE AND LUBRICATION0B-11
SH410
To Next Page
Loading...
Need help?
General
