＿
19
＿
When cutting heavy brush or small trees, always swing the Brushcutter from right to left. Swinging the
Brushcutter from left to right can cause the blade to kick back.
Cutting Direction of Brushcutter Blade
Cutting Blades
1. Use only the correct blade (MARUYAMA genuine part) approved for the application and model Brushcutter.
2. Carefully check the condition of the blades before and after operation.
3. Sharpen dull blades. Replace any blade that is worn, cracked or damaged.
4. If a blade produces eccentric rotation or vibration, replace the blade and the boss adapter with genuine
MARUYAMA parts.
・
If the Brushcutter blade becomes jammed, stop the engine immediately.
・
Make certain all moving parts have stopped and disconnect the spark plug before inspecting the equip-
ment for damage.
・
Never use a Brushcutter that has chipped, cracked or broken cutting attachment or guard.
IMPORTANT: To detach the shoulder strap/ harness quickly from the Brushcutter, pull upward on the
Red Band/ Tab.
CAUTION
・Always wear gloves and protective clothing when operating the Brushcutter.
WARNING
POTENTIAL HAZARD
・ Cutting heavy brush or small trees from the wrong direction can cause the Brushcutter blade to
kick back.
WHAT CAN HAPPEN
・Contact with the Brushcutter blade can cause severe personal injury
.
HOW TO AVOID THE HAZARD
・
Always swing the Brushcutter from right to left when cutting heavy brush or small trees as shown.
Red Band
Red Tab
Hook
Ring
Pull
Pull
[
BC4321H-RS
][
BC2301RS, BC2601RS, BC3021RS
]
No Kick-back Zone
DANGER
Kick-back Zone
Direction of
Swing
CORRECT INCORRECT
Direction of
Swing
Shoulder
Harness
Shoulder
Strap
To Next Page
Loading...
