3
69
Before Starting
• Remove the emergency key as
indicated in "Keys" chapter of the
current section.
• Loosen the lateral screw that
connects the two side covers with a
torx T6 screwdriver.
• Separate the two lateral covers from
the key fob case.
• Separate both parts of the key fob
case.
• Remove the card with PCB (Printed
Circuit Board).
• Remove the battery from its seat and
replace with a new recommended
type of battery.
ENVIRONMENTAL!
Batteries contain dangerous materials
that could harm the environment.
Please dispose of them according to
local regulations or at the Service
Network.
(Continued)
To Next Page
Loading...
