Need help?Do you have a question about the Masibus masTER T-Sync MTS200 and is the answer not in the manual?
Provides information and steps for installing the GPS antenna and cable.
Configure device settings using the front panel keypad.
Configure device remotely via serial, SSH, or Telnet using console interface.
Details the NTP server functionality and output capabilities of the MTS200.
Explains SSH protocol for secure device configuration and monitoring.
Details SNMP protocol for device management, monitoring, and traps.
Describes accessing and configuring the device via its webserver interface.
Troubleshoots power, time, GPS lock, and serial communication problems.
Addresses NTP, network, and IPv6 synchronization and configuration problems.
Provides information and steps for installing the GPS antenna and cable.
Configure device settings using the front panel keypad.
Configure device remotely via serial, SSH, or Telnet using console interface.
Details the NTP server functionality and output capabilities of the MTS200.
Explains SSH protocol for secure device configuration and monitoring.
Details SNMP protocol for device management, monitoring, and traps.
Describes accessing and configuring the device via its webserver interface.
Troubleshoots power, time, GPS lock, and serial communication problems.
Addresses NTP, network, and IPv6 synchronization and configuration problems.
General| Stratum Level | Stratum 1 |
|---|---|
| Synchronization Standard | IEEE 1588v2 |
| GPS Receiver | Integrated |
| Antenna | External GPS antenna |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols Supported | NTP, SNTP, PTP |
| Time Accuracy | ±100 ns |
| Operating Temperature | 0°C to 50°C |
| Power Supply | 50/60Hz |
| Mounting | Rack mountable |
To Next Page