73
Malfunction analysis and elimination
Although the machines receive a rigid
inspection before shipment from the
factory,trouble may occur during
operation.Any problem in the fuel,
compression,or ignition systems can cause
poor starting and loss of power. The
troubleshooting chart describes a quick,easy
procedure for making checks.If your
machine requires any repair,take it to your
dealer. The skilled technicians at your
dealer dealership have the tools, experience,
and know how to properly service your
machine. Use only genuine parts on your
machine. Imitation parts may look like
parts, but they are often inferior.
Consequently, they have a shorter service
life and can lead to expensive repair bills.
POTENTIAL HAZARD
Checking the fuel system while smoking or
near an open flame.
WHAT CAN HAPPEN
Fuel can ignite or explode, causing severe
injury or property damage.
HOW TO AVOID THE HAZARD
Do not smoke when checking the fuel
system. Make sure there are no open flames
or sparks in the area, including pilot lights
from water heaters or furnaces.
To Next Page
Loading...
