EasyManua.ls Logo

Mastech MS8212A User Manual

Mastech MS8212A
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MS8212A
Pen-type Digital
Multimeter Manual
CAT III
600V
Question and Answer IconNeed help?

Do you have a question about the Mastech MS8212A and is the answer not in the manual?

Mastech MS8212A Specifications

General IconGeneral
TypeDigital Multimeter
DisplayLCD
Display Count2000
Resistance Range200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
Diode TestYes
ContinuityYes
Continuity BuzzerYes
Data HoldYes
Battery9V
DC Current Range20mA/200mA
AC Current Range200mA/10A
Capacitance Range200nF
Frequency Range2kHz/20kHz
DC Voltage Accuracy±(0.5% + 2 digits)
AC Voltage Accuracy±(1.2% + 10 digits)
DC Current Accuracy±(1.0% + 2)
AC Current Accuracy±(1.5% + 5 digits)
Resistance Accuracy±(1.0% + 2)

Summary

Safety Information

Preparation and Safe Usage

Instructions on preparing the multimeter for use and guidelines for safe operation during measurements.

Safety Symbols and Maintenance

Explanation of safety symbols and guidelines for maintaining the multimeter.

Product Description

Overview and Features

General description of the multimeter and its key features.

Front Panel Components

Identifies and describes the components of the multimeter's front panel.

Button Functions

Explains the purpose and operation of the multimeter's various buttons and controls.

Specifications

General Specifications

Outlines the general specifications and environmental conditions of the multimeter.

Technical Specifications: Voltage

Details technical specifications for DC and AC voltage measurements, including ranges, resolution, and accuracy.

Technical Specifications: Resistance, Continuity, Diode Test

Technical specifications for resistance, continuity, and diode test functions.

Technical Specifications: Current and Logic

Technical specifications for DC/AC current and logic test functions.

Using the Meter

Reading and Max Hold Functions

How to use the reading hold and max hold functions to capture measurements.

Function, Range, and Auto Power Off

Explanation of function button, manual range selection, and the auto power off feature.

Measurement Preparation and DC Voltage

How to prepare for measurement and perform DC voltage measurements.

AC Voltage and Resistance Measurement

Procedures for measuring AC voltage and resistance.

Diode Test and Continuity Measurement

Instructions for performing diode tests and continuity measurements.

Current Measurement (DC/AC)

Steps for measuring DC and AC current, including safety precautions.

Logic Test and NCV Detection

How to perform logic tests and use the non-contact voltage detection feature.

Maintenance

Battery Replacement

Step-by-step guide on how to replace the multimeter's batteries safely.

Test Lead Replacement

Instructions on when and how to replace damaged test leads or alligator clips.

Accessories

Related product manuals