PAIRING
EN
5
Three microphones in each earphone provide the freedom to listen or talk
with just one earphone.
The first time you take both earphones out of their case they will enter
pairing mode.
STEP 1: Open the Bluetooth menu on your device
STEP 2: Select M&D MW09
STEP 3: Download and open the M&D Connect app
To manually activate pairing mode, hold down the multi-function button
until the indicator light starts pulsing/pairing tone is heard.
NOTE: If you are already connected to a device, remove the earphones
from your ears to avoid activating your voice assistant.
RIGHT
MULTI-FUNCTION BUTTON
PULSING INDICATOR LIGHT
To Next Page
Loading...
