Master Forge 820-0033 - Installation Instructions; Gas Hook-Up Procedure; Propane Cylinder Requirements

10
GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the grill should be used. Any
replacementpressureregulatorandhoseassemblymustbespeciedbythegrillmanufacturer.This
grillisconguredforliquidpropane.DO NOT use a natural gas supply.
Total gas consumption (per hour) with all burners set on “HIGH”
Main burners 16,000 BTU/Hr.
Total 16,000 BTU/Hr.
The installation of this appliance must conform with local codes or, in the absence of local codes,
with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation
Code, CSA B149.1, or Propane Storage and Handling Code, B149.2,or the Standard for Recreation
Vehicles,ANSIA119.2/NFPA1192,andCSAZ240RVSeries,RecreationVehicleCode,as
applicable.
LIQUID PROPANE CYLINDER REQUIREMENTS (20-lb cylinder)
•Adentedorrustyliquidpropanecylindermaybehazardousandshouldbecheckedbyyoursupplier.
•NEVER use a cylinder with a damaged valve.
•Theliquidpropanecylindermustbeconstructedandmarkedinaccordancewiththespecications
forliquidpropanecylindersbytheUnitedStatesDepartmentofTransportation(DOT)orthe
National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of
Dangerous Goods Commission.
•The20-lbcylindermusthaveashutoffvalveterminatinginavalveoutletspecied,asapplicable,
for connection type QCC1 in the standard for compressed gas cylinder valve outlet and inlet
connectionANSI/CGA-V-1.
•Storageofanoutdoorcookinggasapplianceindoorispermissibleonlyifthecylinderis
disconnected and removed from the outdoor cooking gas appliance.
•Thecylindersystemmustbearrangedforvaporwithdrawal.
•Thecylindermustincludeacollartoprotectthecylindervalve.
•Manifoldpressure:(operating)11incheswatercolumn(W.C.),(non-operating)11.2incheswater
column. (W.C.).
•TheliquidpropanecylindermustbettedwithanOverllProtectionDevice(OPD).
•Removetheplasticvalvecoverfromtheliquidpropanecylinder.
•Makesurethegrillgashosesdonotcontactthegreasepanorgrillreboxwhentheliquidpropane
cylinder is placed into the cart.
INSTALLATION INSTRUCTIONS
Lowes.com/masterforge