NTP100 – Rev 2.2.0 Oct-12
24
© Masterclock
®
, Inc.
The year overwrite feature may be used if the Time Code signal (model –TC) does not contain year information in the
IRIG –B/B1 time code to the IEEE 1344 standard.
Note: the time data /information will continue to be decoded from the time code signal, and will always overwrite the
manual entry.
[Note: for the purpose of refreshing its internal clock, the NTP100 assumes the time and date entered is UTC.]
Year overwrite enabled –
Ignore Year from Reference (external)
To Next Page
Loading...