Need help?Do you have a question about the Masterclock NTP100 -SERIES and is the answer not in the manual?
General| Protocols | NTP, SNTP |
|---|---|
| Time Source | GPS |
| Network Interface | 10/100Base-T Ethernet |
| Mounting | Rack Mount |
| Type | NTP Server |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 0°C to 50°C |
| Dimensions | 1U, 19" rack mount |
Advisory on GPS signal reliability and potential errors for NTP100-GPS.
Advisory on time code signal reliability and potential errors for NTP100-TC.
Overview of the NTP100 series, its models, and core features.
Explanations of Coordinated Universal Time (UTC), NTP protocol, and GPS time sources.
Guidelines for environment, GPS antenna connection, and placement.
Required information and preparation before installing the NTP100.
Step-by-step guide for connecting and powering up the NTP100.
Processes for acquiring GPS or time code signals for synchronization.
Details on time code input impedance, level, and format selection.
Description of the front panel display and LED indicators.
Summary of key features and automatic network configuration using DHCP/BOOTP.
Explanation of various NTP packet transmission modes.
Managing RTC backup, factory reset, and default password.
Using WinDiscovery software and troubleshooting communication problems.
Viewing summary information about the NTP100 device.
Configuring IP address, Netmask, Gateway, and DNS settings.
Adjusting display brightness and accessing advanced settings like Telnet and outage handling.
Procedures for setting, changing, or removing the NTP100's password.
Manually setting the time and date for the NTP100 unit.
Status information for GPS, Time Code, and Internal Clock models.
Setting a unique name for the NTP100 device.
Configuring IP address, Netmask, Gateway, and DNS settings.
Assigning stratum levels and configuring the NTP server port.
Adjusting Telnet configuration and defining the telnet port.
Setting a short identifier for the NTP100 unit.
Resetting the NTP100 to its factory default settings.
Configuring how long the NTP100 serves time during reference outages.
Troubleshooting IP address conflicts, fallback IPs, and erratic device behavior.
Resolving Telnet connectivity and NTP/SNTP client communication problems.
Diagnosing invalid time indications and loss of configuration settings.
Solutions for lost passwords and repeated "Bad Password" errors.
Details on communication protocols, Ethernet, RS-232, and I/O.
Specifications for time code input, impedance, and power needs.
Battery types, capacities, and replacement information for NTP100 models.
Physical dimensions, weight, and GPS antenna specifications.
Environmental operating and storage temperature and humidity limits.
Details on warranty exclusions, limitations, and customer remedies.
To Next Page