Masterclock NTP100 -SERIES - Physical and Environmental Specs; Physical Dimensions and Antenna Specs; Operating and Storage Conditions

NTP100 – Rev 2.2.0 Oct-12
48
© Masterclock
®
, Inc.
Physical
Size ..................................................................................... 6.75 x 4.13 x 1.5 in. (17.15 x 10.48 x 3.81 cm)
Weight ................................................................................ 17.3 oz. (490.5 g)
Pre-Amplified Antenna (required for model NTP100-GPS only)
Frequency ........................................................................... 1575 MHz ± 10 MHz
Polarization ......................................................................... Right Hand Circular
Impedance ........................................................................... 50 Ohm
Weight ................................................................................ 8.3 Oz (235 gr.)
Voltage ............................................................................... 5 VDC (center pin)
Power Consumption ........................................................... @ 20 ma (.24W)
Gain .................................................................................... 26 dB Standard
Temperature ........................................................................ -40 to +70°
Operating/Storage Temperature & Humidity
Operating Temperature ....................................................... 0 to +50°C
Note: Holdover accuracy with TCXO ........................................ 0 to +50°C (+/- 1min/year), +40°C to +50°C (+/- 4min/year)
Relative Humidity ........................................................... Up to 90% (non condensing @ 25°C)
Storage Temperature ........................................................... -40 to +70° C
Relative Humidity ........................................................... Up to 90% (non condensing @ 25°C)