NTP100 – Rev 2.2.0 Oct-12
36
© Masterclock
®
, Inc.
The communication settings for the RS-232 port are: 9600 baud, 8 data bits, 1 stop bit, no parity.
Consult the section entitled Telnet Terminal Configuration
for details on how to change configuration using the terminal
interface.
Once the communication parameters in the terminal interface program are established, apply power to the NTP100-GPS or
NTP100-OSC and they will announce themselves, as shown in the example HyperTerminal window. The serial interface
menu is identical to the Telnet interface menu.
To Next Page
Loading...