MasterCraft 052-0060-2 - TECHNICAL SPECIFICATIONS; Voltage Measurement Specifications

If the voltage being measured is > 300 V, the display may show
the value of the voltage, but the measurement is dangerous.
1
DC VOLTAGE
Input Impedance: 1 MΩ
Max. Allowable Input Voltage: 300 V
RANGE
OVERRANGE
INDICATION
"1" shown on
display
±(0.8% + 5)
±(0.5% + 5)
±(1.0% + 5)
±(1.2% + 5)
RESOLUTION ACCURACY
AC VOLTAGE
Frequency Range: 40–400 Hz
Max. Allowable Input Voltage: 300 V
Response: Average, calibrated in RMS of sine wave
RANGE
OVERRANGE
INDICATION
"1" shown on
display
200 V
100 mV
1 V
300 V
RESOLUTION ACCURACY
If the voltage being measured is > 300 V, the display may show
the value of the voltage, but the measurement is dangerous.
1
200 mV
2000 mV
20 V
200 V
300 V
100 μV
1 mV
10 mV
100 mV
1 V
model no. 052-0060-2 | contact us 1-800-689-9928
9
TECHNICAL SPECIFICATIONS