MasterCraft 052-0060-2 User Manual

Set the range switch to "OFF" position and remove all the test
leads from the meter.
Shake out any dirt which may exist in the terminals.
Soak a new swab with alcohol.
Work the swab around in each terminal.
MAINTENANCE
Except replacing fuse and battery, never attempt to repair or service
the meter.
Store the meter in a dry place when not in use. Don't store it in an
intense electromagnetic field environment.
Warning
Periodically wipe the case with a damp cloth and a little mild
detergent. Do not use abrasives or solvents.
Dirt or moisture in the terminals can affect readings. Clean the
terminals as follows:
General Maintenance
If the meter does not seem to work properly, check and replace
(as needed) the battery or fuses, or review this manual to verify
correct operation.
1.
2.
3.
4.
model no. 052-0060-2 | contact us 1-800-689-9928
17
MAINTENANCE

MasterCraft 052-0060-2 Specifications

General

Brand	MasterCraft
Model	052-0060-2
Category	Multimeter
Language	English