For safety reasons, the operator must
read the sections of this Owner’s
Manual entitled “GENERAL SAFETY
WARNINGS”, “POWER TOOL
SAFETY”, “SPECIFIC SAFETY RULES”
and “SYMBOLS” before using this
multi-crafter.
Verify the following every time the
multi-crafter is used:
1. Safety glasses, safety goggles, or
face shield are being worn.
2. Hearing protection is being worn.
3. The blade or sandpaper is in good
condition.
4. The accessory is properly
tightened onto the accessory
holder of the tool.
Failure to observe these safety rules
will significantly increase the risk of
injury.
To Next Page
Loading...
Need help?
General
