SAFETY GUIDELINES
7
MIG/FLUX-CORE WIRE FEED WELDER KIT 058-8195-2
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Do not allow unskilled or untrained individuals to install and operate this
welder.
• Before operating the welder, check the insulation of the ground cable, power
cord, and welding cable for damage. Replace or repair the damaged
components before using the welder.
• Keep hands and fingers away from moving parts and stay away from the
drive rolls while the welder is in use.
• Do not allow any body part of the user to come in contact with the welding
wire while holding the welding gun.
• Do not allow the user to drape cables over or around the body.
• Do not point MIG gun toward the user or other personnel.
• Do not allow a person to use electronic devices such as pacemakers in the
welding area.
• Consult a doctor before using any electric arc welder or cutting device.
To Next Page
Loading...
Need help?
General
