SAFETY GUIDELINES
6
MIG/FLUX-CORE WIRE FEED WELDER KIT 058-8195-2
• Risk of explosion: Keep high pressure shielding gas cylinder away from
welding or electrical circuits. Do not touch the cylinder with MIG gun and do
not weld on the cylinder. Use proper regulators, gas hoses, and fittings for
the specific application.
• Do not expose the welder to rain.
• Risk of UV and IR arc rays: Do not look at the welding arc without proper eye
protection, as the welding arc produces ultraviolet (UV) and infrared (IR) rays.
Use screens or other barriers to protect other personnel from the rays.
To Next Page
Loading...
Need help?
General
