PYLONS
Models
All
Purpose
When properly utilized, ski pylons allow skiers the opportunity to be
towed behind the boat with a sensible and unobstructed view by
individuals in observer seats.
Location
Varies by model, but pylons are generally adjacent to or integrated
within aft seating. (See Guide to Individual Models in this Owner’s
Manual for specific model locations.)
Operation
See the Ski/Wakeboard Rope information under Additional Safety
Support in this section of the Owner’s Manual. Avoid tangling rope
around the pylons or any other portion of the boat.
Special Attention
Some pylons are removable. In those instances, always be certain
that the pylon has snapped securely into place prior to usage.
Failure to do so could result in injury.
Failure to follow instructions regarding the care and maintenance
of ballast pumps as outlined in this Owner’s Manual can result in
damage to the ballast pump that is not covered under warranty.
Troubleshooting
• If the ballast pumps do not turn ON when the switch is activated
or the touch screen is used, check that the circuit has not tripped
on the main circuit breaker panel. Continual tripping after reset is
indicative of an issue that requires the attention of an authorized
MasterCraft dealer.
• If the ballast pumps do not work when the circuit breaker has
not been tripped, it is likely that the pump has malfunctioned,
probably due to running while the tanks were empty. Regardless
of cause, it is necessary to take the boat to an authorized Master-
Craft dealer to determine whether the impeller and/or pump must
be replaced.
Your authorized MasterCraft dealer has an extensive troubleshoot-
ing tree for ballast systems that includes parts of the system that
are not accessible to the consumer. Because a malfunctioning
ballast system can cause problems with control of the boat, no po-
tential issue that arises with the system should ever be ignored.
To Next Page
Loading...
Need help?
General
