Need help?Do you have a question about the Mastervolt COMBIMASTER 24V/3000VA-60A and is the answer not in the manual?
General| Input Voltage | 230V AC |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 24V DC |
| Output Power | 3000VA |
| Output Current | 60A |
| Category | Battery Charger |
| Inverter Power | 3000VA |
| Battery Type | Lead-acid, Gel, AGM, Lithium-ion |
Specifies the intended use of the CombiMaster for charging batteries and supplying loads.
Provides general safety precautions and warnings for operating the CombiMaster.
Warns about the risk of explosive gases when working near lead-acid batteries.
Outlines personal safety measures to be taken when working with batteries.
Details the requirements for proper grounding of the CombiMaster.
Lists crucial warnings and precautions related to battery usage with the CombiMaster.
Explains the different modes of operation: Inverter, Charger, and Power Sharing.
Describes the various protection mechanisms built into the CombiMaster.
Specifies suitable locations and environmental conditions for installing the CombiMaster.
Recommends battery capacities for different CombiMaster models.
Gives warnings and guidelines for connecting the CombiMaster's wiring.
Details DC cable cross-section requirements based on wire length and model.
Provides a step-by-step guide for physically mounting the CombiMaster.
Explains how to configure the CombiMaster using DIP switches.
Details various configuration settings adjustable via software or DIP switches.
To Next Page