Do you have a question about the Mastervolt COMBIMASTER 12/3000-160 and is the answer not in the manual?
Input Frequency | 50/60 Hz |
---|---|
Output Voltage | 12 V DC |
Output Power | 3000 W |
Peak Power | 6000 W |
Max Charging Current | 160 A |
Transfer Switch | Yes |
Protection | Overload, Short-circuit, Overtemperature |
Cooling | Fan |
Critical warnings and precautions for handling lead-acid batteries.
Precautions and instructions for making DC and AC electrical connections.
Details on overload, short circuit, temperature, and battery voltage protections.
Recommended battery capacities for different CombiMaster models.
Guidelines for DC cable sizing, fusing, and connection.
Instructions for neutral to ground bonding and GFCI integration.
Step-by-step guide for mounting the unit.
Connecting AC wiring to the screw terminals and securing cables.
Integrating a fuse holder and connecting DC cabling.
Final wiring check and fuse installation.
How to configure settings using DIP switches for CZone and MasterBus.
Configuring the unit via MasterBus network.
Procedure to reset the thermal breaker after an overload event.
DC wiring example for parallel and split-phase systems.
Guidelines for AC wiring in parallel configurations, emphasizing equal cable lengths.
Wiring diagrams for AC input and output of single-phase parallel units.
Wiring diagrams for split-phase units with one unit per phase.
Wiring diagrams for split-phase systems with two parallel units per phase.
Configuring units using DIP switches for MasterBus parallel systems.
Configuring units using MasterAdjust software.
Configuring units using the CZone Configuration Tool.
Troubleshooting steps for no output voltage or current.
Troubleshooting low output voltage with maximum charger current.
Troubleshooting low charge current issues.
Troubleshooting incomplete battery charging.
Troubleshooting battery low shutdown.
Troubleshooting rapid battery discharge.
Troubleshooting battery overheating and gassing.