TROUBLE SHOOTING
24 February 2011 / MasterShunt / EN
Failure Possible cause What to do
Wrong setting of the language
at displaying device
Each separate connected device can have its own
language setting. See user’s manual of the
connected display.
Wrong setting of the
parameters
Set the parameters correctly. See chapter 11:
Alarm levels.
Alarm function is triggered
by a short time voltage dip
Wrong setting of the alarm
delay time.
Increase the delay time. See chapter 11.
The communication LEDs
blink alternately, indicating
an alarm situation.
All failures can result in an
alarm situation.
Look at your display to find out which failure
needs to be corrected.
To Next Page
Loading...
