SAFETY GUIDELINES AND MEASURES
EN / MasterView Easy MkII / September 2010 5
2 SAFETY
2.1 USE OF SYMBOLS
Safety instructions and warnings are marked in this
manual by the following pictogram:
CAREFUL!
Special data, restrictions and rules with
regard to preventing damage.
A procedure, circumstance, etc which
deserves extra attention.
2.2 USE FOR INTENDED PURPOSE
1 The MasterView Easy is constructed as per the
applicable safety-technical guidelines.
2 Use the MasterView Easy only:
• in a technical correct condition;
• observing the instructions in the users
manual.
• connected to the MasterBus network
3 Use of the MasterView Easy other than
mentioned in point 2 is not considered to be
consistent with the intended purpose. Mastervolt
is not liable for any damage resulting from the
above.
2.3 SAFETY REGULATIONS AND MEASURES
Do not work on an electrical system if it is still
connected to a current source. Only allow changes
in your electrical system to be carried out by
qualified electricians.
To Next Page
Loading...
Need help?
General
