optional remote control URC 2A as "setup switch"
as well.
Notice: Firmware and software updates are availa-
ble
on
our website www.audiotec-fischer.com
The PC tool software will automatically install the
latest firmware on the last selected memory location
if
your device is not up-to-date.
Important: Car-specific setups
of
other MATCH
amplifiers (e.g. PP 50DSP
I PP 52DSP) can not be
MODE Switches
Affects all eight output channels!
Only affects subwoofer channels!
used for the
PP
82DSP!
But it is possible to upload ".afp"-files
of
a PP50
DSP to the PP 82DSP via the PC tool software. This
is only a compatibility mode and all adjustments
should be checked carefully after using a PP50
DSP afp-file.
OFF
ON
Mode switch on remote control bypasses
MATCH sound optimization if pressed
Mode switch on tremote control activates AUX
input if pressed
MODE Switch no. 5 has no function
if
remote control is
deactivated via MODE switch no.6
Please note:
It is possible to deactivate
I reactivate both Mode swit-
ches no.5 and 6 via the PC-tool software.
17
To Next Page
Loading...
