MATCO TOOLS MAXTPMS 2.0 - User Guide
UM-MDMAX-MA2-01 User manual MATCO TOOLS MAXTPMS 2.0 Page 41/47
2. TROUBLESHOOTING
If the TPMS TOOL is unable to trigger one or more of the sensors, please use the following
troubleshooting procedure:
1) The vehicle does not have a sensor even though a metal valve stem is present. Be
aware of rubber style snap-in stems used on TPMS systems.
2) The sensor itself may be damaged or defective.
3) Wrong make, model, year selected.
4) Your TPMS TOOL may require a software upgrade.
5) Your TPMS TOOL is damaged or defective.
Please contact your tool supplier for further assistance.
3. TOOL UPDATE
Updating your TPMS TOOL
When a new protocol becomes available, it will become necessary to updatate your tool.
Please follow the steps below:
3.1. WIFI UPDATE
The best and seamless option to update your TPMS tool is to use the WiFi update function.
Please refer to the dedicated section into this guide to update your tool wirelessly.
3.2. INSTALL WEB VT PC SUITE
Another option to update your TPMS tool is to use the Web VT PC suite.
1) Visit www.maxtpms2.com/software and download the Web VT software.
2) Click on the Web VT icon to start the installer program.
3) A screen will appear that says “Welcome to the Install Shield Wizard for Web VT.”
Click “Next >”
4) A window will appear for choosing the destination location, click “Next >”
5) Follow the instructions until the window with the “Finish” button appears.
6) Click “Finish” when the Web VT installation is complete.
Note: To order annual software license update, please see your dealer for availability and
pricing.
IMPORTANT: Temporarily turn off all anti-virus and spam blocking software on your
computer. This is necessary to ensure a successful update.
To Next Page
Loading...
