___________________________________________________________________________________
MBT1015 rev-C
User’s Manual Versio18.08
New Test
This function will allow you to key in the particulars (e.g. license plate
numbers, names, etc) that you need before commencing the test. The
particulars will be included in the test results when printed out from its printer.
It also allows the test Results to be saved in its memory which can be called
up for later viewing and printout.
Note: If you do not key in any particulars (e.g. license plate number, etc.) the
results obtained saved as blank in the memory.
Continue Testing
Selecting this item will allow you to continue the last test on the same car from
where you had stopped and do not need to key the vehicle’s particulars as it
will update automatically.
For example:
If you had done Battery Test on [New Test] and later you wish to do Alternator
Test or Grounding Test on the same car, just select this item and it will update
the results after each test in its memory so that it can be review later or to be
printed out from the printer.
Stored Results
The Analyser allows saving up to 47 tested Results in its memory. Access into
this function will permit you to view the tests done previously and also able to
print out a hardcopy of it whenever needed.
Use or keys to scroll for the pages during viewing.
Examples of the results:
Fig. 19
Fig.18
Battery: Good
Measured: 406 CCA
Rating: 630 CCA
Volts: 12.45 V
Int. R: 6.72 mOhm
Life: 76 %
[Exit] to Menu
Results: High Ohms
6.69 mOhm
The grounding
resistance of the
engine or car
chassis is high.
Clean the cable
contacts or replace
cable if necessary.
To Next Page