Additional Tests
BATTERY/ALTERNATOR MONITOR
38
If the battery reset process is not successful, a “Reset Fail”
message displays. Press M to return to the Main Menu.
To perform battery reset OBD service (Audi/Volkswagen):
1. While linked to a vehicle, press M.
The Main Menu displays.
2. Select Battery Reset, then press ENTER
.
The Battery Reset menu displays.
3. Select Battery Reset OBD Service, then press ENTER
.
An “informational” screen displays.
4. Select Next, then press ENTER
to continue.
A series of “instructional” screens display, directing you to enter
reference information for the battery (part number, manufacturer,
serial number).
5. Select Next as necessary, and press ENTER
to scroll the
screen and enter the necessary information.
A “confirmation” screen displays.
The screen shows the previously
entered Battery part number,
Battery manufacturer and Battery
serial number.
6. Select the desired option:
To proceed with coding, select
Carry out coding and press
ENTER
. Proceed to step 7.
To re-enter battery reference information, select Repeat input
and press ENTER
. Repeat steps 4 an 5.
To cancel the battery reset process,
select Cancel and press ENTER
to return to the Main Menu.
7. If battery coding was successful, a
“confirmation” screen displays. Press M
to return to the Main Menu.
If battery coding was not successful,
an “advisory” screen displays. Press
M to return to the Main Menu.
BATTERY/ALTERNATOR MONITOR
The Scan Tool can perform a check of the vehicle’s battery and
alternator system to ensure the system is operating within acceptable
limits. You can perform a battery check only, or an alternator system
(battery and alternator) check.
To Next Page
Loading...
