Additional Tests
THE TOOL LIBRARY
43
1. While linked to the vehicle, press M.
The Main Menu displays.
2. Select Tool Library, then press ENTER
.
The Tool Library menu displays.
Viewing Tool Icon Descriptions
The I/M MONITOR STATUS icons on the Scan Tool’s LCD display
provide an indication of the “Completed / Not Complete” status for all I/M
Monitors supported by the vehicle under test. The Tool Icons function
displays the full name for each Monitor icon, as well as descriptions of
the meanings of other informational icons shown on the Scan Tool’s
display.
1. From the Tool Library menu, select Tool Icons, then press ENTER
.
The Tool Icons screen displays.
The screen shows a list of the 15
Monitor icons, along with the full
name for each icon, as well as
descriptions of the meanings of
other informational icons.
2. When you have finished viewing the
tool icon descriptions, press M
to return
to the Main Menu.
Using the DTC Library (OBD1)
1. From the Tool Library menu, select
DTC Library, then press ENTER
.
The Select Library screen displays.
2. Select OBD1 Library, then press
ENTER
.
The Select Manufacturer screen displays.
3. Select the desired vehicle manufacturer, then press ENTER
.
A confirmation message shows.
- If the correct manufacturer is not shown, select No, then press
ENTER
to return to the list of vehicle manufacturers.
- If the correct manufacturer is shown, select Yes, then press
ENTER .
4. The Enter DTC screen displays.
To Next Page
Loading...
