- 3 -
1. GENERAL INFORMATION
1.1 WARNINGS
The manufacturer does not accept any responsibility for direct or indirect damage to people, things or
animals and use of the appliance in different conditions from those foreseen.
The manufacturer reserves the right to make changes to the documentary information or to the appliance
without advance notice.
Check the machine responds to the standards in force in the state in which it has been installed.
All operations necessary for maintaining machine efficiency before and throughout use are the operator’s
responsibility. Carefully read the entire manual before operating the machine.
It is vital to know the information and limitations contained in this manual for correct machine use by the
operator. Interventions are only permitted if the operator is accordingly competent and trained.
The operator must be knowledgeable about machine operations and mechanisms.
The purchaser must ensure that operators are trained and aware of all the information and clarifications in
the supplied documentation. Even with such certainty the operator or user must be informed and therefore
aware of potential risks when operating the machine. Safety, reliability and optimum performance is
guaranteed when using original parts.
Any tampering or modifying of the appliance (electrical, mechanical or other) which has not been previously
authorised in writing by the manufacturer is considered abusive and disclaims the constructor from any
responsibility for any resulting damage. All necessary operations to maintain the efficiency of the machine
before and throughout use are the responsibility of the user.
1.2 WARNING AND DANGER INDICATIONS - SIGNS
The machine has been designed and constructed according to the current norms and consequently with
mechanical and electrical safety devices designed to protect the operator or user from possible physical
damage. Residual risks during use or in some intervention procedures on the device are however present.
Such risks can be reduced by carefully following manual procedures, using the suggested individual protection
devices and respecting the legal and safety norms in force.
This manual includes “Warning” and “Danger” indications in relevant chapters. These indications are shown
with the words “Danger” or “Warning” in bold font and uppercase to make them highly visible.
WARNING
It indicates that machine damage could be caused should indications be
ignored.
DANGER
It indicates that machine damage and/or injury to the worker could be caused
should indications be ignored.
“DANGEROUS ZONE” indicates any zone inside or in the proximity on the appliance in which a person is
exposed to the risk of injury of damage to health.
1.3 AIM OF THE INSTRUCTIONS MANUAL
This manual has been edited with the aim of providing all machine operators with all the necessary
information on installation, use and maintenance from production to scrapping in as comprehensive and
clear manner as possible.
All the procedures useful for any foreseeable emergency situations have been listed by the manufacturer
and can be verified during use.
Operators, for whom this manual has been written, due to their competence must give instructions or operate
the machine themselves.
The instructions manual must be carefully consulted by laboratory or site safety managers, equipment
operators and any internal and external maintenance workers.
The manual is integral to the product and refers to this appliance only.
The manual must be safeguarded and always kept near the equipment so that it can be easily consulted
whenever necessary.
IMPORTANT: The manual does not substitute the experience and technical training of the worker but must
be considered a guide for carrying out its functions.
Furthermore, all the norms and rules the operator should be aware of or consult for correct use of the
machine and/or test performance can be found in the manual.
To Next Page
Loading...