- 4 -
This responsibility is entrusted to the installer and Laboratory or Site Manager where the machine is
installed.
The Constructor is available to provide further information.
1.4 STRUCTURE OF THE INSTRUCTIONS MANUAL
The manual can consist of a number of documents, as shown in the appropriate list.
Verify that all documents are present; otherwise request the missing parts from the Constructor before using
the machine. Instructions can be supplied with enclosures containing diagrams and designs, which are
necessary for interpretation of correct machine use and maintenance.
1.5 COMPOSITION OF THE INSTRUCTIONS MANUAL
Document Description Document Code
Instructions manual E142.M01.EN.03
1.6 MODIFICATIONS AND ENCLOSURES OF THE INSTRUCTIONS MANUAL
This manual reflects the state at the time of the launch of the machine on its market. If any modifications,
improvements, or adjustments have been made since machine supply the Manufacturer does not have to
intervene on the marketed machine and will not consider the machine or the manual deficient or inadequate.
1.7 CONSTRUCTOR IDENTIFICATION
See first page.
1.8 MACHINE IDENTIFICATION DATA
See machine identification data on EC Declaration or behind the machine.
1.9 EC STAMP
See EC Declaration
1.10 USAGE
This dynamometer measures the adhesive force and the tensile strength of two
layers of materials (concrete, facing plasters, mortars, building plasters, lime etc.)
and is particularly suitable for applications concerning testing repairs of any structure where the bond
strength between two layers is an essential factor.
WARNING
DANGER
This appliance is for the exclusive use which it has been conceived for.
Any other use is considered improper and therefore negligent.
Machine use is allowed only in places free from danger of explosion or
fire. During operation check for conditions of danger.
immediately stop the machine should it be working irregularly and
consult the authorised dealer’s Sales Service department.
It is the Client’s responsibility to verify at the time of installation and use
that no conditions of use arise which are different to those indicated.
1.11 OPERATORS
WARNING
DANGER
The use, transportation, installation, maintenance, demolition and disposal
of the appliance are only permitted to “QUALIFIED PERSONNEL”.
This manual is exclusively aimed at “QUALIFIED PERSONNEL” and
contains the necessary information for machine use.
” QUALIFIED PERSONNEL” means people who, due to their training, experience and education, as well as
knowledge of the relevant standards, limitations and measures, have been authorized by the “PLANT
SAFETY MANAGER” to carry out any necessary activity and are able to recognise and avoid any possible
danger. The manufacturer recommends that the instructions, procedures and recommendations in this
manual and the work safety legislation in force be scrupulously adhered to, even with the use of appropriate
protection devices (whether individual or part of the machine).
Knowledge and respect of the instructions, safety warnings and danger in this manual are all necessary for
installation, operation, management and machine maintenance with a minimal risk.
The “PLANT SAFETY MANAGER” has the following responsibilities and duties:
To Next Page
Loading...