- 5 -
- To know the machine functions, its commands, safety and protection devices, possible dangers of use and
all the information in this manual in detail. This knowledge can only be gleaned from detailed reading of this
manual.
- To know the safety legislation in force in detail in order to operate the machine
- To recognize the “QUALIFIED PERSONNEL” for transportation, handling, installation, use, maintenance,
disposal, etc.
- Correctly train and educate the “QUALIFIED PERSONNEL” before allowing them access to the machine.
The personnel must also be exhaustively trained with regards to the machine’s protection devices.
- Ensure the machine’s safety devices are not tampered with or removed and are checked on a daily basis.
Provide the operator appropriate individual protection devices according to the laws in force.
- The constructor is available for clarification, assistance and training and deceptions all responsibility for
damage to things or people resulting from improper, incorrect and negligent use by untrained personnel.
1.12 STORAGE
WARNING
The appliance must be stored and conserved in the original packaging and in a
closed environment, protected from atmospheric agents with a minimum temperature
of -15C°, and a maximum of +60C° and a maximum humidity of 70%.
1.13 TRASPORTATION AND MOVEMENT
DANGER
WARNING
In order to avoid irreparable machine damage, move with care, do not
overturn, protect from rain, do not stack, protect the packaging and its
contents from bumps and sources of heat.
During transportation and movement it is important to avoid bumps, overloading with other packages,
exposure to freezing or heating atmospheric agents, or any other potentially harmful condition to the device,
things or people. Machine transportation and movement must be entrusted to Qualified Personnel who can
ensure correct movement
DANGER
WARNING
Do not transport or move the product should it be impossible to respect the
conditions on the packaging or there be any doubts. Request information from
the constructor
1.14 PACKAGING REMOVAL
Supplied complete with carrying case.
After removing the packaging check the machine is complete and that there are no visibly
damaged parts. DO NOT USE THE MACHINE and refer to the constructor when in doubt.
DANGER
The components used for packaging (plastic bags, polystyrene, nails, screws, wood,
etc) must be kept out of reach of children, as they are sources of danger. These
components should be placed in the appropriate containers.
Before disposing of the packaging check all machine components such as
accessories, utensils, instructions, documents etc have been removed.
WARNING
In order to avoid bumps and overturn adopt the normal and logical precautions.
To Next Page
Loading...