EasyManua.ls Logo

Matrix Telecom Proton 206 - Privacy; Private Trunk

Default Icon
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROTON 206/308 V1 System Manual 63
Relevant Topics:
1. “Installation” 54
2. “Troubleshooting” 74
Privacy
What’s this?
While two stations are in speech, it is desired that no third person can listen their talk i.e. privacy of their
conversation in maintained.
However if few important stations are allowed to use features like interrupt request, barge-in and raid, they can
intrude other’s conversation. Also if DID is activated, outside caller can reach a station or if there is a call from
another trunk line, it will interrupt your conversation by giving intrusion tone. Some times this is very annoying
and undesirable. The PROTON-308 provides privacy against all these types of intrusion. This is known as
privacy.
These are three types of intrusions against which a user might wish privacy:
Privacy from Interrupt Request/Barge-In and Raid
Privacy from Trunk call routing beeps
Privacy from DID calls
How to program?
Use following command to program the station for call privacy:
303-Station-Privacy from IR/BI/Raid-Privacy from Trunk call routing beeps-Privacy from DID calls.
Where,
Station is from 21 to 28.
Use following command to program call privacy on all the stations:
303-*-Privacy from IR/BI/Raid-Privacy from Trunk call routing beeps-Privacy from DID calls
Example:
To program call privacy from Raid and DID calls on station 23, dial 303-23-1-0-1. With this, no station can raid
station 23. Also DID calls will not disturb station 23.
Important Points:
The feature ‘Transfer-on Busy’ will not work if call privacy from trunk call routing beeps is enabled.
By default, Privacy for Trunk Call routing beeps is enabled on all the stations. Whereas, privacy for Interrupt
Request/Barge-In and Raid and DID call is disabled on all the stations.
Private Trunk
What’s this?
The PROTON 206/308 offers a flexibility to assign a dedicated trunk to a station.
On programming a trunk as Private trunk for a station:
All the incoming calls land directly on the assigned station.
HOD gets activated on the trunk.
Privacy from
IR/BI/Raid
Privacy from Trunk call
Routing Beeps
Privacy from
DID Calls
Meaning
0 0 0 Disable privacy
1 1 1 Enable privacy

Table of Contents

Related product manuals