PROTON 206/308 V1 System Manual 7
Welcome
Thanks for purchasing a Matrix product.
We want you to get the maximum performance from our product. If you run into technical difficulties, we are here
to help. But please consult this system manual first.
If you still can’t find the answer, gather all the information or questions that apply to your problem and with the
product close to you, call your dealer. Matrix dealers are trained and ready to give you the support you need to
get the most from your Matrix product. In fact, most problems reported are minor and can be easily solved over
the phone.
In addition, technical consultation is available from Matrix engineers every business day. We are always ready to
give advice on application requirements or specific information on installation and operation of our products.
Please note that the words ‘Station’ and ‘User’ are used synonymously.
The system manual is arranged alphabetically. We suggest the first time users to read this system manual in
following sequence of topics.
• “Introduction” 59
• “Installation” 54
• “Flexible Numbers” 51
• “Demonstration of Tones” 41
• “Distinctive Rings” 46
• “Internal Call” 57
• “External Call” 48
• “Selective Trunk Access” 70
• “Answering Calls” 17
• “Receiving Incoming Calls” 67
• “Call Pick Up” 29
• “Call Transfer” 33
• “Last Number Redial” 61
• “Abbreviated Dialing” 11
• “Call Splitting” 32
• “Hold” 52
• “Power Down Mode” 62
• “Default the Configuration” 41
• “Programming the System” 64
To Next Page
Loading...
