Matrix C3X-02 - IR Sensor Replacement

73
9.19 IR SENSOR REPLACEMENT
CHAPTER 9: PARTS REPLACEMENT GUIDE
FIGURE A FIGURE B
FIGURE DFIGURE C
1) Turn off the power and disconnect the cord from the machine.
2) Remove the Matrix logo covers from each side of the machine.
3) Remove the front cover (Figure A).
4) Remove the IR sensor cable from the LCB, and cut any wire ties holding the cable to the frame (Figure B).
5) Remove the plugs from each side of the machine (Figure C) and separate the side covers.
6) Remove the 2 screws holding the IR sensor to the frame (Figure D).
FIGURE DFIGURE C