82
10.4 STABILIZING THE CLIMB MILL
stabiliZinG tHe matrix Climb mill
The Matrix Climb Mill should be level for optimum use. Locate a level, stable surface to position the equipment. The equipment has leveling
transport wheels located under the rear side covers (Figure A). To access, grab the left and right side covers and lift off. Adjust the leveling
feet (Figure B) until the equipment is stable and lock the wheels into place. Once stable, move the covers back into place.
CHAPTER 10: CLIMB MILL SPECIFICATIONS AND ASSEMBLY GUIDE
FIGURE A FIGURE B
To Next Page
Loading...
