13
6.1 ENGINEERING / SERVICE MODE OVERVIEW
ENGINEERING MODE
Disable errors: Displays the class A and B error codes.
sPeeD unit: Sets the distance to show in miles or kilometers.
macHine tYPe: Should be set for Elliptical Trainer at all times.
PoWer saVe time: Sets the amount of time the console keeps the workout information after the completion of a workout.
SERVICE MODE
serVice 1: Display Test.
serVice 2: Keypad Test.
serVice 3: Accumulated Distance and Time.
serVice 4: CSAFE Test.
serVice 5: Error Log.
FIGURE A
FIGURE B
CHAPTER 6: ENGINEERING MODE
To Next Page
Loading...
