EasyManuals Logo

Matrix ETERNITY NENX User Manual

Matrix ETERNITY NENX
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
13 Matrix ETERNITY NE Quick Start
Connecting Extensions
Single Line Telephones (SLT)
Use standard twisted wire pair cables of good quality with RJ11 plugs to connect the analog single line
telephone instruments to the SLT Ports of ETERNITY NENX.
Place the SLTs, fax machine at the desired locations. Connect the SLTs, Fax machine to the wall jacks.
Plug the RJ11 end of the telephone cables into the SLT Ports of ETERNITY NENX.
Terminate the other end of the cables from the SLT Ports on the wall jacks to which the SLTs, fax machine
are connected.
SIP Extensions
ETERNITY NENX supports up to 50 SIP Extensions. You can register SIP enabled devices like an IP Phone, a
Softphone, Analog Telephone Adapter as SIP Extension of ETERNITY NENX.
By default, ETERNITY NENXIP50 supports registration and configuration of 50 SIP Extensions and
ETERNITY NENX312
4
and ETERNITY NENX416
5
supports registration and configuration of 10 SIP
Extensions only. To configure and register additional SIP Extensions, you need to purchase and activate
the IP Subscriber license as per your requirement. To know how to activate the same, refer to Activating
License Key”.
You may also connect/register the following as SIP Extensions of ETERNITY NENX:
SPARSH VP248, the Extended IP Phone
SPARSH VP310, the Executive IP Phone
SPARSH VP330, the Intuitive Touch Screen Extended IP Phone
SPARSH VP510, the Premium IP Phone
Extended SPARSH VP710, the Smart IP Deskphone
SPARSH VP210, the Entry Level IP Phone
Matrix VARTA WIN200, Unified Communication Client for Windows
Matrix Mobile UC Clients,
Matrix VARTA AMP100, the Mobile UC Client for iPhones
Matrix VARTA ADR100, the Mobile UC Client for Android Smartphones
Third Party IP (Open) Phones
The SIP Extensions may be registered either over Ethernet WAN or over Wireless WAN, according to your
preference and your IP network installation scenario.
4. Make sure you have purchased and installed the VoIP module.
5. Make sure you have purchased and installed the VoiP module.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix ETERNITY NENX and is the answer not in the manual?

Matrix ETERNITY NENX Specifications

General IconGeneral
BrandMatrix
ModelETERNITY NENX
CategoryPBX
LanguageEnglish

Related product manuals