22
This variable controls the default
program time
95:005:0020:00USER TIMEP14
This variable controls the default
program speed
12
MPH
/ 16
KPH
0.5
MPH
/ 0.8
KPH
0.5MPH /
0.8KPH
USER SPEED P13
Language in which information is
display
LANGUAGEP12
Display the product’s software
version
VERSIONP11
Display total accumulated distance TOTAL DISTANCEP10
Display total accumulated timeTOTAL TIMEP9
This variable controls the default
weight used in the calorie
calculations.
KRH
180 /
MPH
400
KRH2
2 /
MPH
50
KPH80 /
MPH150
SET WEIGHTP8
Error information OUT OF ORDER
Test the keypadKEYPAD TEST
LED test mode DISPLAY TEST
The console will do the auto calibration
including speed and incline
AUTO CHECK
Only for factory test modePRODUCT TEST
Remarks :
If you want to the clean accumulate time and distance. please enter engineer mode
select “P9 or P10” and Hole the “Down & Slow” key for 3’s, to clean accumulate
time and distance.
To Next Page
Loading...
